3. INSPECTION/ADJUSTMENT K-XCT 125i 1. Remove the oil filler cap/dipstick(1) from the right crankcase cover. 2. Place a container under the left crankcase. 3. Remove the oil drain plug (2) to drain the oil. 4. Reinstall the drain plug and tighten the drain plug to specification. Oil drain plug torque: 25 N-m (2.5 kgf-m,) 5. Fill the crankcase with the recommended grade oil and install the oil filler cap. Oil capacity (after draining): 1.0 L(0.95 US qt, 0.8 lmp qt) (1) 6. Start the engine and let it idle for 23 minutes. 7. Stop the engine and check that the oil level is at the upper level mark on the oil filler cap/dipstick with the scooter upright on firm, level ground. Make sure there are no oil leaks. Let the engine and exhaust system cool before working in those areas. (2) 3-7