3. INSPECTION/ADJUSTMENT MXU 300/250 CLEAN AIR FILTER ELEMENT Wash the element gently, but throughly in solvent. Use parts cleaning solvent only. Never use gasoline or low flash point solvents which may lead to a fire or explosion. Squeeze the excess solvent out of the element and let dry. Do not twist or wring out the foam element. This could damage the foam material. Apply the engine oil. Squeeze out the excess oil. The element should be wet but not dripping. More frequent replacement is required when riding in unusually dusty or rainy areas. Air Cleaner Housing AIR CLEANER HOUSING DRAIN Remove the drain tube (under air cleaner case) by removing the clip. Drain the deposits. Reinstall the drain tube, securing it with the clip. Drain Tube Clip AIR FILTER FOR DRIVE BELT To clean the air filter: Remove front center cover. (See page 2-7) Remove air filter. Tap the element lightly to remove most of the dust and dirt. Blow out the remaining dirt with compressed air. Installation is in the reverse order of removal. Air Filter If necessary replace the air filter. 3-6