3. INSPECTION/ADJUSTMENT PEOPLE/PEOPLE S 250 Radiator Cap Remove the front cover. Remove the radiator cap. Remove the drain bolt to drain the coolant and tilt the scooter to the right and the coolant will drain more easily. Drain the coolant in the reserve tank. Reinstall the drain bolt. Fill the radiator coolant. · The coolant freezing point should be 5 lower than the temperature of the riding area. Drain Bolt Start the engine and check if there are no bubbles in the coolant and the coolant level is stable. Reinstall the radiator cap. If there are bubbles in the coolant, bleed air from the system. Fill the reserve tank with the recommended coolant up to the upper line. BRAKE SYSTEM Rear Brake Reservoir Front Brake Reservoir BRAKE FLUID Turn the steering handlebar upright and check if the front/rear brake fluid level is at the upper limit. If the brake fluid is insufficient, fill to the upper limit. Specified Brake Fluid: DOT-4 · The brake fluid level will decrease if the brake pads are worn. BRAKE DISK/BRAKE PAD Check the brake disk surface for scratches, unevenness or abnormal wear. Brake Disk Check if the brake disk rubout is within the specified service limit. Check if the brake pad wear exceeds the wear indicator line. · Keep grease or oil off the brake disk to avoid brake failure. Wear Indicator Line 3-10