5. FUEL SYSTEM SUPER8 125 Auto Bystarter CARBURETOR REMOVAL Remove the frame right side cover. ( 2-4) Disconnect the auto bystarter wire connector. Remove the met-in box. ( 2-3) Auto Bystarter Wire Loosen the drain screw and drain the fuel from the float chamber. Disconnect the fuel tube and vacuum tube at the carburetor. Disconnect the TPS coupler and remove the TPS unit TPS Unit Fuel Tube Loosen the throttle cable adjusting nut and Air Cleaner Connecting Vacuum Tube Intake Manifold lock nut, and disconnect the throttle cable Tube Band Band from the carburetor. Loosen the carburetor intake manifold band and air cleaner connecting tube band screws and then remove the carburetor. Throttle Cable Adjusting Nut Lock Nut AUTO BYSTARTER OPERATION INSPECTION Measure the resistance between the auto bystarter wire terminals. Resistance: 10 max. (10 minutes minimum after stopping the engine) If the reading is not within the limit, replace the auto bystarter with a new one. 5-4