4. LUBRICATION SYSTEM MYROAD 700i SERVICE INFORMATION GENERAL INSTRUCTIONS · The oil pump service may be done with the engine installed in the frame. · When removing and installing the oil pump use care not to allow dust or dirt to enter the engine. · If any portion of the oil pump is worn beyond the specified service limits, replace the oil pump as an assembly. · After the engine has been installed check that there are no oil leaks and that oil pressure is correct. · For oil pressure indicator inspection, refer to section 20 of this manual. SPECIFICATIONS Unit: mm ITEM STANDARD SERVICE LIMIT At draining 2.6 liter Engine oil At disassembly 3.0 liter capacity KYMCO 4-stroke oil or equivalent motor oil Recommended engine oil API service classification SJ Viscosity: SAE 5W-50 Tip clearance 0.15 mm 0.2 mm Oil pump rotor Body clearance 0.15 0.2 mm 0.25 mm Side clearance 0.04 0.09 mm 0.12 mm TORQUE VALUES Oil pump bolt 0.8~1.2 kgf·m Oil cooler bolt 1.2~1.8 kgf·m Oil pressure switch 1~1.4 kgf·m Oil filter cartridge 2.0~3.0 kgf·m TOOLS Oil filter wrench A120E00061 4-2