14.STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK ABSORBER/FRONT FORK GRAND DINK 125/150 ASSEMBLY Install the damper spring onto the damper rod and then install them into the front shock absorber tube. Install the shock absorber spring onto the front shock absorber tube. Set the front shock absorber tube in a vise and then tighten the lock nut. When holding the shock absorber tube, place a shop towel to protect it and do apply too much force . Set the front shock absorber in a vise. Insert the shock absorber tube into the shock absorber and then install the copper washer and tighten the damper rod hex bolt. Apply locking agent to the washer and hex bolt and install them together. Add engine oil into the front shock absorber. Torque: 4.929.4N-m Specified Oil: SAE30 Hex Bolt Copper Washer Circlip Dust Boot Oil Capacity: 81cc Install the oil seal Install the circlip. Install the dusts seal and dust boot. Dust Seal INSTALLATION Install the front shock absorbers onto the front fork. Install and tighten the front shock absorber upper mount bolts. Tighten the lower mount bolts. Align the upper mount bolt hole with the groove on the front fork. Install the front wheel. ( 14-7) 14-16