9. CYLINDER HEAD/VALVES MYROAD 700i SERVICE INFORMATION GENERAL INSTRUCTIONS · The cylinder head can be serviced with the engine installed in the frame. Coolant in the radiator and water jacket must be drained first. · When assembling, apply molybdenum disulfide grease or engine oil to the valve guide movable parts and valve arm sliding surfaces for initial lubrication. · After disassembly, clean the removed parts and dry them with compressed air before inspection. · After removal, mark and arrange the removed parts in order. When assembling, install them in the reverse order of removal. SPECIFICATIONS Unit: mm Item Standard Service Limit Cylinder head compression pressure 13 kg/cm2 IN 0.160.03 Valve clearance (cold) EX 0.220.03 Valve Stem O.D. IN 4.475~4.490 4.465 EX 4.455~4.470 4.445 IN 5.000~5.012 4.532 Valve Guide I.D. EX 5.000~5.012 4.532 Valve stem-to-guide IN 0.010~0.037 0.08 clearance EX 0.030~0.057 0.1 Valve lifter O.D. 27.965~27.98 27.91 Camshaft cam height IN 36.6 36.5 EX 36.6 36.5 TORQUE VALUES Cylinder head cover bolt 0.8~1.2 kgf·m Apply engine oil to threads Breather separator bolt 0.8~1.2 kgf·m Apply engine oil to threads Cam chain holder bolt 0.8~1.2 kgf·m Cylinder bolt 0.8~1.2 kgf·m Cam chain tensioner bolt 0.8~1.2 kgf·m Cylinder head bolt 4.8~5.2 kgf·m Apply engine oil to threads 9-2